Univers by FTE U3500 Guia de Instalação

Networkfleet 3500 Product LineInstallation GuideLight/Medium Duty (L3500) | Heavy Duty (H3500) | Universal (U3500)www.networkcar.com/eet |

10v.3500.1.6Universal (U3500) Unit OverviewThe Universal unit can be installed in light, medium and heavy vehicles. It is a GPS data only device and

11v.3500.1.6Connecting to Ground and PowerBlack Wire - Ground • With the vehicle’s engine OFF, attach the Black Wire directly to a chassis ground po

12v.3500.1.6Blue Wire - Switched Power • With the vehicle’s engine OFF, use the voltmeter to locate an IGNITION line with switched power and attach

13v.3500.1.61. Use enclosed alcohol preparation pad to clean the inside windshield where the antenna is to be placed. For proper operation, the anten

14v.3500.1.6Reconnecting the Antenna Wires • If the antenna becomes disconnected from the unit during installation, make sure to reconnect the ante

15v.3500.1.61. Start the vehicle’s engine. All lights (Red, Yellow, and Green) on the device should begin blinking rapidly (twice a second).2. The

16v.3500.1.6Creating Tamper Evidence1. For the Cellular Antenna, slide the end of the Networkcar branded yellow zip tie into the cut-away section o

17v.3500.1.6Creating Tamper Evidence3a. Once the Light/Medium Duty vehicle harness is plugged in, slide a Networkcar branded yellow zip tie through

18v.3500.1.6Securing the Device & Completing Installation1. Before securing the device under the dashboard, make sure that you have recorded the

19v.3500.1.6Appendix: Troubleshooting Light IndicatorsIssue: Red light continues to blink rapidlySolution: – Verify antenna connection to device a

2v.3500.1.6Getting Started Registration form ...

20v.3500.1.6Frequently Asked QuestionsGeneralQ: What is the power draw for the device?A: Normal Operating Mode 200 mA @ 12 V Sleep Mode 21 mA @ 12VQ:

21v.3500.1.6Frequently Asked QuestionsAntennaQ: Are the antennas interchangeable between the 3100, 3400 and 3500 product lines?A: No. Q: Can the glass

22v.3500.1.6Contacting NetworkcarIf you have any additional questions, you may contact Networkcar Customer Care:Toll Free Number: 1-866-227-7323Email

3v.3500.1.6Fill out the enclosed registration form before completing installation. Record the following information: • Vehicle Identication Number

4v.3500.1.6Light/Medium Duty (L3500) Unit OverviewRetainer Bar (X1) Harness Adapters (X7)Core Connector (X1) Bypass Connector (X1) Harness Flat Cable

5v.3500.1.6Harness Assembly Instructions1. Select an Adapter Select an adapter that most resembles the shape of the OBD-II port of the vehicle. Use

6v.3500.1.6Connecting the Harness and Unit 1. Core Connector Assembly 1. Snap the selected plastic adapter to the back of the Core Connector. 2.

7v.3500.1.6Connecting into the OBD-II Port1. With the vehicle’s engine OFF, remove the OBD-II port. • The OBD-II Connector may be hidden behind a h

8v.3500.1.6Heavy Duty (H3500) Unit Overview6-Pin Harness (X1)Bypass ConnectorCore Connector9-Pin Harness (X1)Bypass ConnectorCore ConnectorData PortIn

9v.3500.1.6Connecting into the Diagnostic Link Connector (DLC) port1. With the vehicle’s engine OFF, unscrew the DLC port from its position under th